Sika Construction Chemicals

Approx. Rs 450 / KgGet Latest Price

Approx. Rs 800 / KgGet Latest Price

Approx. Rs 220 / KgGet Latest Price

Approx. Rs 150 / KgGet Latest Price

Product Price :Get Latest Price

Approx. Rs 670 / PieceGet Latest Price

• Fast curing
• Standard guns can be used
• Medium to high load capacity
• ETA Approval available
• Suitable for cracked concrete
• Drinking Water certified
• LEED Attestation available
• Non-sag, even overhead
• Styrene-free
• Low odour
• Low wastage

Approx. Rs 90 / KgGet Latest Price

Additional Information:

Approx. Rs 880 / KgGet Latest Price

• Low viscocity epoxy resin with long potlife for crack injection

Uses:

• As an injection resin with good adhesion to dry concrete, mortar, stone, steel and wood. Sikadur®-52 is used to fill and seal voids and cracks in structures such as bridges and other civil engineering buildings, industrial and residential buildings, e.g. columns, beams, foundations, walls, floors and water retaining structures.

Approx. Rs 60 / KgGet Latest Price

• Water Tanks
• Basements
• Terraces & Balconies
• Bridges
• Retaining walls
• Sea Walls
• Flat Roofs

Approx. Rs 200 / KgGet Latest Price

Approx. Rs 105 / KgGet Latest Price

• Highways
• Runways and taxiways
• Aprons and hard standings
• Roof decks
• Canals linings.

• Reduces incidence plastic cracking
• Ensures achievement of designed strengths
• Minimises shrinkage
• Reduces surface dusting
• Eliminates expensive methods of curing such as hessian-watering, etc
• Test Approval Standard ASTM C 309-89 Type 2 Class A System Information Application Details Consumption / Dosage 0.10 to 0.20 kg/m2 depending on wind, humidity and temperature. 
• Actual dosage to be finalised on the basis of site trials. 
• Application Method/Tools Stir Sika®Antisol®-E(WP) well before application. 
• Apply uniformly on to the newlylaid concrete as soon as the surface water evaporates. 
• Apply preferably using lowpressure sprayer uniformly on concrete surface. Brush/Roller application couldconsume more Sika®Antisol ®-E(WP) due to the very nature of the application. 
• Notes on Application/ Limitations Remaining Sika®Antisol®-E(WP) films must be removed prior to application of any screed, plaster or coatings on the concrete surface.
• Cleaning of Tools Clean all tools and application equipment with petrol immediately after use. 
• Value Base All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
• Health and Safety Information For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data. 
• Legal Notes The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled andapplied under normal conditions in accordance with Sika’s recommendations. 
• Inpractice, the differences in materials, substrates and actual site conditions are suchthat no warranty in respect of merchantability or of fitness for a particular purpose,nor any liability arising out of any legal relationship whatsoever, can be inferredeither from this information, or from any written recommendations, or from any otheradvice offered. 
• The user of the product must test the product’s suitability for theintended application and purpose. 
• Sika reserves the right to change the propertiesof its products. The proprietary rights of third parties must be observed. All ordersare accepted subject to our current terms of sale and delivery. 
• Users must alwaysrefer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.

Approx. Rs 14 / KgGet Latest Price

Approx. Rs 900 / KgGet Latest Price

• Trowel applied medium flow mortar.
• Pourable grout / Flowable grout. Typical applications for SikaGrout® VHS are:- 
• Under machine foundations and base plates. Reinforcement ducts in the connection detail between precast columns and beams.

Approx. Rs 1,950 / RollGet Latest Price

This type of membrane is manufactured by modifying premium grade asphalts with atactic poly propylene and specially reinforced with nonwoven polyester felt. They show excellent strength, elasticity and durability.

Characteristics / Advantages:

• Can be handled in warmer temperatures easily Requires solvent / water based primer before laying of membrane
• Minimum water absorption
• Easy to install by torching method
• Overlaps to be provided minimum 80 to 100 mm
• Long term flexibility
• Excellent water tightness
• High tensile strength, tear and puncture resistant Capable of withstanding thermal and structural stresses
• Highly durable-excellent under long term aging.

Approx. Rs 160 / KgGet Latest Price

Approx. Rs 900 / KilogramGet Latest Price

• Sika® Injection-101 h is used for the temporary water stopping of high water intrusions in cracks, joints and cavities in concrete, brickwork and natural stonework.
• To achieve permanent watertight crack sealing, Sika® Injection-201 or Sika® Injection -203 should be injected subsequently.

Approx. Rs 420 / PieceGet Latest Price

• Sikaflex® Construction+ is designed for movement and connection joints in concrete facades.

• Very good resistance to weathering
• Movement capability of ± 35 (ASTM C 719)
• Bubble-free curing
• Good workability
• Good adhesion to many substrates
• Solvent-free
• Very low emissions.

Approx. Rs 340 / PieceGet Latest Price

• As a primer under Sikaflex® , Sikaflex® AT joint sealants and SikaBond®, SikaBond® AT elastic adhesives on porous substrates such as concrete.

• Easy to apply n Provides better and longer bonding
• Can be used on surfaces upto 8% moisture content
• Can be used both on porous (concrete, cementitious surfaces etc.) and nonporous substrates (metal, etc.)

Approx. Rs 260 / KgGet Latest Price

• New or old reinforcement steel in construction
• Embedded steel in repairable structures Various steel structures like tanks, water pipelines, effluent pipelines, trusses, purlins, rafters etc.
• Ball bearings, valves, tools etc. Ideal for protecting reinforcements with insufficient cover or in thin sections

Approx. Rs 13 / KilogramGet Latest Price

• Sika® Chapdur provides a hard wearing, mineral dry shake topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured, wear resistant smooth surface.
• Typical uses are in warehouses, factories, shopping malls, public areas, restaurants and museums

Additional Information:

Approx. Rs 700 / KgGet Latest Price

Approx. Rs 350 / KgGet Latest Price

Approx. Rs 165 / KgGet Latest Price

• Used as a seamless, impervious coating on flat roof for both exposed and concealed waterproof coating system
• Basements, water retaining structures, underground concrete structures, pits basins, sumps etc

Approx. Rs 1,000 / KgGet Latest Price

Additional Information:

Product Price :Get Latest Price

Approx. Rs 325 / BagGet Latest Price

• Nitofl or Hardtop Standard provide a highly abrasion resistant surface to concrete fl oors by the dry shake-on method which ensures that the hardwearing surface bonds monolithically to the base concrete. They are ideally suited for all industrial areas subject to the heaviest traffi c, e.g. loading bays, trucking lanes, car parks, workshops, machine shops, ramps and spillways

• Non metallic - does not rust or stain.
• Provides a hard, abrasion resistant surface
• Forms monolithic bond with base concrete
• Easy and economical to apply

Product Price :Get Latest Price

Approx. Rs 25 / KgGet Latest Price

Approx. Rs 430 / BagGet Latest Price

• Long pot life
• High temperature resistance at elevated curing temperatures (see the Sika® Carbo Heater Product Data Sheet)
• Easy to mix and apply
• No primer needed
• High creep resistance under permanent load
• Very good adhesion to concrete, masonry, stonework, steel, cast iron, aluminum, timber and Sika CarboDur® Plates
• Suitable for dry and damp concrete surfaces
• Hardening is not affected by high humidity
• High strength adhesive
• Thixotropic: non-sag in vertical and overhead applications
• Hardens without shrinkage
• Different coloured components (for mixing control)
• High initial and ultimate mechanical resistance
• High abrasion and shock resistance
• Impermeable to liquids and water vapour.

Approx. Rs 1,300 / Square MeterGet Latest Price

Approx. Rs 460 / KgGet Latest Price

Approx. Rs 400 / MeterGet Latest Price

Approx. Rs 14 / KgGet Latest Price

• Ready to use non-shrink, cementitious micro concrete

 
Uses:

• Columns
• Beams
• Slabs, etc.
• It is also recommended for grouting of large gaps.
• Consumption ~2000 kg of powder/ cubic meter of concrete.

Approx. Rs 900 / BagGet Latest Price

Approx. Rs 2,200 / BagGet Latest Price

Approx. Rs 350 / LitreGet Latest Price

• Used as a primer for the application on asbestos, brick, false ceiling, concrete surface, cementitious renderings, wall putty, other surfacings, etc.

Approx. Rs 1,450 / KgGet Latest Price

Elastic PU-Injection resin for permanent watertight sealing Sika® Injection-202 IN is a very low viscous, elastic and solvent-free polyurethane injection resin. In contact with water, a uniform, closed and therefore watertight pore structure forms, which is elastic and flexible.

Approx. Rs 1,200 / Square MeterGet Latest Price

Approx. Rs 1,700 / Square MeterGet Latest Price

Approx. Rs 550 / KgGet Latest Price

• Solvent free long potlife epoxy bonding agent

Uses:

Sikadur®-32 provides a bond of far greater strength than the tensile strength of the

concrete itself. Therefore it is suitable for use as a structural bonding agent for:

• New to existing concrete
• Mortar
• Steel, Iron