MYK Arment

Approx. Rs 350 / KgGet Latest Price

Product BrochureProduct Details:

It is single component water based acrylic waterproof coating. It can be applied to most structural surfaces to make them waterproof. The coating is UV stable and highly reflective with high flexibility.
 It is used for waterproofing of all types of RCC surfaces such as roofs chajjas, Parapet walls and external walls.
Asbestos cement sheets roofs can also be waterproofed using scrim cloth or Aso Joint Tape at the junctions overlaps and J-bolts as reinforcement.
As a damp proof course applied under the first layer of bricks or blocks in masonry works.

Approx. Rs 280 / KgGet Latest Price

Product BrochureProduct Details:

AquaArm Kool Roof is a single component, water based high thermal reflectance & emittance coating, It has the ability toreflect the visible, infrared and ultraviolet wavelengths of the sun, thereby reducing heat transfer to the building / structure,which significantly lowers the surface temperature of your roof and structural exteriors

Approx. Rs 450 / KgGet Latest Price

Product BrochureProduct Details:

AquaArm Damp Coat is a two-component epoxy resin based waterproofing compound. One part is consisting of epoxy resinand the other part with curing agent. After mixing both the parts it can be thinned down with water. It possesses all theattributes of normal solvent based epoxy compositions such as excellent water and chemical resistance, adhesion, hardness, toughness and mechanical strength. One of the major advantage of AquaArm Damp Coat, over solvent based epoxy is that it can be applied on damp surfacealso. Being free from solvents, it does not pose any health hazard to the applicator. AquaArm Damp Coat is completely, consentient & economical to apply

Approx. Rs 450 / LitreGet Latest Price

Product BrochureProduct Details:

AquaArm Latex 45 is a single component product based on modified SBR latex, designed for use as a ready to use bonding agent and cement modifier. It is used as an admixture for obtaining waterproof concrete, plasters and mortars.

Approx. Rs 230 / LitreGet Latest Price

Product BrochureProduct Details:

AquaArm Bond Latex is a SBR based liquid for high performance applications in waterproofing and repairs.
 As a bonding agent for the following:  Plaster to plaster  Concrete to concrete  Plaster over brick masonry  As a additive for waterproof plaster  To repair Plaster cracks more than 5 mm  As a coating for prevention of corrosion in rebars mixed with cements  As waterproof slurry coat (2coats) on concrete surface 

Approx. Rs 1,200 / BucketGet Latest Price

Product BrochureProduct Details:

It is acrylic emulsion based, used as acement modifier when applied, provides good bond with masonry/ cement and thus improves the tensile and flexural strength properties of the mortar.
 Sunken portions of toilets & bathrooms, chajjas, masonrysurfaces, kitchen, sewers, residential water tanks etc.  Repair wall  Durable and aesthetic exterior finish with cement paint

Product Price :Get Latest Price

Product BrochureProduct Details:

FloArm Primer PUDC is a solvented, three-part based on polyurethane technology, Consist Base having low Viscosity clear liquid, Hardener is a low viscosity brown liquid and it consists a Special Filler which is a fine white powder.
FloArm Primer PUDC is applied to prepared concrete substrates prior to coating with FloArm DeckCoat PU1/PU2 flooring. It is also to be use as a primer for AquaArm SPU. It reduces the porosity of the prepared concrete. 

Approx. Rs 360 / KgGet Latest Price

Product BrochureProduct Details:

It is single component water based elastomeric acrylic waterproof coating. Its water proofing capabilities outshine regular paint and form an effective barrier against penetration of water. It can be appliedto most structural surfaces. The coating is flexible yetUV stable
 Can be applied onRoof chajjas, parapet walls and exteriorwalls
 Waterproof&Decorativecoating for exterior walls of the buildings

Approx. Rs 249 / KgGet Latest Price

Product BrochureProduct Details:

AquaArm TopGuard is a cementitious, polymer dispersionbased flexible protective coating and waterproof barrier. This product is two-component and resistant to water, moistureand abrasion. Its liquid component is solvent free. AquaArm TopGuard is a stand-alone product. It can be top or over coatedwith flexible or rigid mortars or coatings for uniform appearance.

Uses
 Balconies, Chajjas  Toilet / Bathrooms  Roof & Terraces

Approx. Rs 420 / KgGet Latest Price

Product BrochureProduct Details:

Two component polymer modified flexible cementitious waterproofing coating. AquaArm FlexiCoat is a economic cementitious, polymer dispersion based highly flexible protective coating and waterproof barrier. This product is two-component and resistant to water, moisture and abrasion. Its liquid mixing component issolvent free.AquaArm FlexiCoat is a stand-alone product. It can be top or over coated with flexible or rigid mortars, stuccos or coatings for uniform appearance. It bridges shrinkage cracks. Larger cracks, static (nonmoving) or dynamic (moving),can be sealed withSealArm Joint Tape or SealArm Joint TapeS.

Approx. Rs 350 / KgGet Latest Price

Product BrochureProduct Details:

AquaArm WPU Ultra is a single-component, liquid applied, elastomeric polyurethane coating for waterproofing of concretesurfaces. AquaArm WPU Ultra provides excellent resistance to moisture, water, and salts penetration into concrete andmasonry surfaces. It conforms to ASTM C-836

Approx. Rs 340 / KgGet Latest Price

Product BrochureProduct Details:

AquaArm SaniGuard is a ready to use, synthetic rubber-based polymer dispersion material which dries to form aseamless elastomeric waterproofing membrane. The waterproof membrane provides a breathable yet waterproof elastomeric barrier with excellent crack bridging properties.

Approx. Rs 340 / LitreGet Latest Price

Product BrochureProduct Details:

ReArm Rust Remover is very effective product for removing mill scale and rust, besides removing thin films of oil and grease ReArm Rust Remover is formulate dusing phosphoric acids and other chemicals. ReArm Rust Remover removes thin filmsof oil / grease from steel surfaces. Removes millscale, rustand welding scales. ReArm Rust Remover commands itself to you on manygrounds-efficiency, economy, and inventorysavings in need of water.

Product Price :Get Latest Price

Product Details:

AquaArm SPU SPL is single component moisture-cured high polymerized polyurethane based, bitumen free waterproof coating. It can react with the moisture in the air and forms a non-toxic and highly elastomeric waterproof coating.

Approx. Rs 500 / KgGet Latest Price

Product BrochureProduct Details:

It is a single component chloride free Integral Waterproofing Liquid admixture for concrete and mortar to minimize the shrinkage cracks, permeability and increase the waterproofing properties of concrete and mortar.
mproves workability, High reduction in permeability, Reduces shrinkage cracks, Chloride free hence doesn’t affect concrete, Increases cohesiveness of concrete & mortars

Approx. Rs 755 / KgGet Latest Price

Product BrochureProduct Details:

ArmGrout Epoxy IGis a two part epoxy resin system for grouting gaps ranging from 0.3 mm to 10 mm. It is a two part system consisting of a base and hardener.
This is the most ideal product for repairs and rehabilitation ofstructures showing hair line cracks, it's used to fill up cracksin roof slabs and other areas to make them structurallysound.

 Moisture insensitive
 Low creep characteristics
 High compressive, tensile and flexural strengths
 Fast, convenient pumping
 Withstands a wide range of chemicals

Approx. Rs 420 / KgGet Latest Price

Product BrochureProduct Details:

AquaArm Proof WP-PIntegral waterproofing powder is composed of waterproofing additives in powder form, used for waterproofing of concrete and cement plasters.
•Roof slabs
• Water tanks and screeds
• Internal/External plastering

Approx. Rs 340 / LitreGet Latest Price

Product BrochureProduct Details:

ReArm Stone Guard – S is a ready to use solvent based colorless water repellent. It is a color less sol vented siliconbased fluid which imparts permanent water repellant effects to the walls; stone, brick work and cement painted surfaces.
ArmGrout Inject PU1 is used for the injection of water bearing cracks and joints in concrete and stone.
ArmGrout Inject PU1 is used for  Stoppage of water inflows from cracks, joints, etc.  Compacting of loose stones.  

Approx. Rs 450 / LitreGet Latest Price

Product BrochureProduct Details:

ReArm Coat ZP is a two component system based on metallic Zinc and Epoxy resin system. ReArm Coat ZP is a two-component anti-corrosion primer for reinforced steel in concrete as well as structural repair. it actively resists corrosion within the confines of the repair location.
Used as a primer on reinforced bars for anticorrosive System and in concrete repairs Also, can be used on exterior surfaces as a coating of • Machinery, • Fertilizers tanks, • Metal Structural girders, • Metal gate and railings

Approx. Rs 340 / KgGet Latest Price

Product BrochureProduct Details:

ReArm Micro Concrete is ready to use single component dry powder cementitious material. It is supplied as a pre blended polymer modified dry powder the addition of recommended water at the site to produce non-shrink free flowing high strength micro concrete. This is specially designed for repair to damaged reinforced concrete. It is suitable for use in wide range of repairs, pavements, ramps etc.

Approx. Rs 320 / KgGet Latest Price

Product BrochureProduct Details:

ArmGrout HF is polyester based two component resin system specially made to give excellent anchorage .ArmGrout HF can be used to an anchor size of 25mm Diameter into concrete, rock, masonry or brick work where high speed of installation and early application of load is required.

Approx. Rs 900 / KgGet Latest Price

Product BrochureProduct Details:

ArmGrout Inject 2 is a solvent-free thin liquid, two- Component polyurethane resin. ArmGrout Inject 2 is slow reacting and hardens to a non-foaming, non-rigid, pore free material which slightly foams when put into contact with water. ArmGrout Inject 2 bonds to a dry, moist surface and offers an excellent adhesion and tears resistance. ArmGrout Inject 2 has a low glass transition temperature and resists to winter temperatures without causing embrittlement and widening of cracks due to low temperatures without tearing. 

Product Price :Get Latest Price

Product BrochureProduct Details:

SealArm Tape FB 300-M is water impermeable Joint Tape. This tape is easy to handle and perfectly combines to the waterproofing systems AquaArm Saniflex, AquaArm WPU 1K, AquaArm Coat WAC, and AquaArm TG.

Approx. Rs 340 / LitreGet Latest Price

Product BrochureProduct Details:

 Moist / Damp Concrete
 Cementitious screed
 Hardened concrete
 AquaArm Kool Roof Primer is a special primer for metal and concrete surfaces for the product 

Approx. Rs 450 / PieceGet Latest Price

Product BrochureProduct Details:

Two Component Resin-Based, Thixotropic, Multipurpose Adhesive
SealArmTapeBondis a two-component, solvent-free, 100% solids,high-modulus, non-sag, multipurpose bonding agent for horizontal, vertical and overhead applications. When mixedSealArmTapeBondwill give a smooth, paste like consistency used for structural and waterproof bonding of a wide range of construction substrates.

 SealArmTapeBondis a multipurpose, structural adhesive typically used for: Structural  bonding  of  pre-cast  elements  such  as segmental  bridge  units,  crash  barriers,  parapets, curbs etc

 Fixing dowels and starter bars
 Blow hole filling
 Levelling undulated surfaces
 Filling and sealing of static cracks
 Fixing surface injection packers
 Bonding carbonfiberwrap to concrete surfaces

Approx. Rs 700 / sq ftGet Latest Price

Product BrochureProduct Details:

ArmGrout Inject PU1resin is a solvent free polyurethane injection material which is used in conjunction withArmGrout Inject PU1catalyst.ArmGrout Inject PU1foamswithwatercontactby highincreaseinvolumeandbecomesfirmviscoelastic foam, whichsealstemporarilyagainst furtherwater penetration.ArmGrout Inject PU1is resistant against acids and lyes and attacks neither bitumen nor joint tapes. In case of very dry surfaces the material does not foamimmediatelybut it hardens slowly due to the steady addition ofexisting air resp. soil moisture

Approx. Rs 950 / BagGet Latest Price

Product BrochureProduct Details:

FloArm CUL 30 is a premixed self leveling compound in a powder form comprising of specially selected binders, well gradedsand and synthetic polymers plasticizing agents and other ingredients, requiring only addition of water at the job site.FloArm CUL 30 produces highly efficient under layment with self leveling and self finishing properties and renders a smoothfloor. High fluidity, good bond and low shrinkage ensure ease of application. By application of FloArm CUL 30, surfacedepressions, seams and surface defects are instantly eliminated after application