Master Builder

Approx. Rs 430 / Square MeterGet Latest Price

Product BrochureProduct Details:

Underwater sealing and levelling epoxy Putty
MasterBrace ADH 2205 UW is a solvent free, high performance, non-slumping epoxy mortar and adhesive. MasterBrace ADH 2205 UW is specially formulated for enhanced bonding in underwater conditions. The material can be used as a bedding mortar, thixotropic adhesive for bonding concrete or steel, for protection of steel and as a non-sag concrete repair mortar specially in submerged conditions.  

Approx. Rs 170 / LitreGet Latest Price

Product BrochureProduct Details:

SBR Latex cement modifier ensuring higher mixing efficiency with water reduction for site batched mortars & waterproofing/bonding slurry/screed 

Approx. Rs 1,100 / KgGet Latest Price

Product BrochureProduct Details:

Low Viscous, multi-purpose epoxy resin grout for under water applications
MasterInject 1316 UW is a two-component, moisture-insensitive, epoxy resin based crack injection resin for underwater applications. When mixed with properly graded filler in recommended proportions, develops into a hand thixotropic mortar/epoxy concrete for underwater concrete repair.

Approx. Rs 200 / LitreGet Latest Price

Product BrochureProduct Details:

MasterCrete SBR 2 is a milky-white, Styrene- Butadiene co-polymer latex liquid, produced from styrene and butadiene by high-pressure emulsion polymerization with high dispersive properties.When used with cement, concrete and plaster, it reduces the mixing time through high dispersion of the polymer and improves waterproofing, new to old concrete/plaster bonding and strength characteristics and reduces shrinkage and cracking of the mix.

Approx. Rs 220 / KgGet Latest Price

Product BrochureProduct Details:

Alkaline based acrylic modifier for producing site-batched repair mortar, waterproofingcoating, bonding aid

Approx. Rs 680 / Square MeterGet Latest Price

Product BrochureProduct Details:

Pre-Applied Fully Bonded HDPE Waterproofing Membrane for below grade waterproofing.
MasterSeal 730 UVS is an HDPE membrane with unique pressure sensitive adhesive and a state of the arts top film which enable good chemical adhesion with concrete surface.

Approx. Rs 60 / KgGet Latest Price

Product BrochureProduct Details:

Cementitious high strength non-shrink precision grout 
MasterFlow 928T is a non-shrink, natural aggregate precision grout with excellent high early and ultimate strengths. It is specially formulated to provide extended working time even at high ambient temperatures when mixed and placed at any recommended consistency. MasterFlow 928T is normally placed at a flowable consistency to completely fill voids between 25mm and 100mm. Thicknesses greater than 100mm are possible with the addition of aggregate.  

Approx. Rs 200 / LitreGet Latest Price

Product BrochureProduct Details:

MasterEmaco SBR 2 is a milky-white, StyreneButadiene co-polymer latex liquid, produced from styrene and butadiene by high pressure emulsion polymerization with high dispersive properties.When used with cement, concrete and plaster, it reduces the mixing time through high dispersion of the polymer and improves waterproofing, new to old concrete/plaster bonding and strength characteristics and reduces shrinkage and cracking of the mix.

Approx. Rs 75 / LitreGet Latest Price

Product BrochureProduct Details:

MasterLife CH 500 is a powder-based additive containing a blend of crack healing polymers, which when added to fresh concrete mix, imparts the property of auto-healing and permanent sealing of micro cracks in treated structures. MasterLife CH 500 is compatible for use with all types of cementitious material and other chemical admixtures used to produce concrete

Approx. Rs 290 / KgGet Latest Price

Product BrochureProduct Details:

Flexible and elastic single component polyurethane waterproofing membrane
MasterSeal M 262 AP is a one component, high solids, pure polyurethane waterproofing which cures with the humidity in the atmosphere. It produces a highly elastic, hydrophobic membrane and has been designed to offer excellent long term waterproofing performance.  

Approx. Rs 16 / KgGet Latest Price

Product BrochureProduct Details:

MasterTop 100 is a pre-mixed powder designed to be applied as a dry shake over freshly floated concrete floor. MasterTop 100 creates an aesthetically pleasing, coloured floor with significantly improved abrasion resistance. It is based on selected hard wearing mineral aggregates blended with alkali and light fast pigments and hydraulic binders. MasterTop 100 is available in various standard colours.

Approx. Rs 250 / KgGet Latest Price

Product BrochureProduct Details:

Masterflow 410 is a solvent-free low exotherm, filler extended grout, based on modified epoxy resin and is designed for use as a precision, heavy duty chocking grout for engineering applications. It is supplied as a three component system consisting of epoxy resin, combined with inert fillers and the hardener, to produce a high viscosity flowable liquid grout suitable to fill gaps or voids.

Approx. Rs 120 / KgGet Latest Price

Product BrochureProduct Details:

Master Seal 551 is an elastomeric flexible, two component acrylic modified cementitious coating applied by brush, roller or trowel to waterproof and resurface concrete, masonry, and most other construction materials. When cured, a 2mm thick Master Seal 551 membrane shall accommodate movements up to 0.5mm, or up to 1.2mm when reinforced with 100% virgin polypropylene woven fabric.

Approx. Rs 450 / BagGet Latest Price

Product BrochureProduct Details:

MasterTile 25 is a grey cementitious powder modified with specialty polymers and additives to comply with Indian Standards. This versatile, easyto-handle, cement-based adhesive is perfect for fixing ceramic tiles (mostly non-vitrified), and quarry tiles. It provides strong adhesion to cement/sand screeds, to in-situ/pre-cast and aerated concrete, and brickwork.

Approx. Rs 1,000 / KgGet Latest Price

Product BrochureProduct Details:

Master Brace 4500 is a 100% solids long pot lifeblue pigmented epoxy resin for saturation of Master Brace fibre sheet to form insitu Fibre Reinforced Polymer composites.

Recommended Uses:

• Master Brace 4500 is used to saturate theMaster
• Brace carbon, glass or aramid fabricsheets to create a composite with thestructure
• Master Brace composites can be used toincrease flexural, shear, and axial loadcapacity
• Increased impact resistance and to provideblast mitigation
• Reduction of crack propagation andincreased resistance to fatigue.

Approx. Rs 46 / KgGet Latest Price

Product BrochureProduct Details:

Water-reducing and retarding admixture based on modified poly-carboxylic ether MasterPolyheed 9000 is an admixture of a new generation based on modified poly-carboxylic ether. The product has been primarily developed for applications in Ready-mix, Site-batched concrete and cement mortar where the highest performance is required

Approx. Rs 420 / KgGet Latest Price

Product BrochureProduct Details:

MasterSeal M 635 is a single component, liquid applied polyurethane based, elastomeric coating for roof waterproofing.

Recommended Uses:

• Applicable for outdoor use
• Can be applied on concrete and cement mortar.
• Waterproofing of roofs, balconies and terraces. Contact the Technical Service of your local BASF Construction Chemicals office regarding any application required not mentioned here.

Approx. Rs 600 / KgGet Latest Price

Product BrochureProduct Details:

Master polyheed is an economical admixture based on modified polymeric ether. The product has been primarily developed for applications in ready mix and site-batched concrete. MasterPolyheed 8101 is specially designed to allow considerable reduction of mixing water while maintaining control on extend of set retardation. MasterPolyheed 8101 is free of chloride and has low alkali content. It is compatible with all types of cements.

Approx. Rs 600 / KgGet Latest Price

Product BrochureProduct Details:

MasterGlenium® 51 is a polycarboxylic ether based, high range water reducing new second generation super plasticizer concrete admixture developed for readymix concrete and precast industry that needs high early and final strengths and durability.

Advantages:

• Improves concrete’s early and final compressive and flexural strengths, adherence to steel, and impermeability compared to traditional super plasticizers (NSF or MSF***).
• Improves concrete’s mechanic properties like carbonation, resistance to chlorine ion attack, resistance to aggressive chemicals, shrinkage, and creeping.
• Enables the production of low water/cement ratio, low segregation and leaching risk Rheoplastic concrete. 
• Enables production of high early strength concrete even in low temperatures.
• Minimizes stripping time.
• Improves wear resistance of concrete by reducing segregation and bleeding. 
• Reduces application periods of resin based pavement systems on new concrete with its low water/cement ratio, high early strength, and bleeding reduction properties.
• Increases Freezing – Thawing resistance of concrete.
• Reduces curing time and curing temperature in the production of precast elements.
• Can be used with all cement types. Shows less sensitivity to material differentiation.
• MasterGlenium® 51 does not contain.

Approx. Rs 680 / PieceGet Latest Price

Product Details:

MasterSeal 911 is a one component adhesive, based on a modified silane polymer used to secure the MasterSeal 910 swelling gasket to all common substrates in construction.

Approx. Rs 650 / KgGet Latest Price

Product Details:

MasterProtect 180 is a two-component epoxy resin system, comprising pigmented base and a hardener, specifically formulated to protect concrete and steel. On mixing of the two components, it yields a high build, chemical resistant protective coating, which cures to a semi glossy, ultra dense surface that is easily cleaned, hygienic and safe for contact with foodstuff and potable water.

Approx. Rs 420 / KgGet Latest Price

Product BrochureProduct Details:

MasterSeal 501 and MasterSeal 502 are components of BASF’s crystalline capillary waterproofing system. These products contain specialist additives that play the role of the catalyst in the formation of water-insoluble crystalline micro-structures deep within the capillaries and interstices of cementitious matrix of concrete and mortars. As the crystalline capillary waterproofing system enables effective pore sealing it does not rely on film formation on the surface and is not affected by the negative hydrostatic pressure. The system is equally effective against positive and negative water pressure or osmotic pressure. MasterSeal 501, is the most concentrated form within the BASF crystalline waterproofing system and contains the maximum amount of specialist catalysts. MasterSeal 501 can be used as a coating, dry shake or as an additive in the concrete or mortar mix.

Approx. Rs 520 / PieceGet Latest Price

Product BrochureProduct Details:

Single component, moisture curing polyurethane, multi-use elastomeric joint sealant for horizontal & vertical applications.
MasterSeal NP 473U is a high performance, one component, moisture curing, polyurethane construction sealant. It has been formulated with an optimum range of physical properties such as high elasticity and movement accommodation, non-sag, Shore A hardness, tensile / tear strength and modulus to make it perfectly suited for sealing dynamically moving joints in a wide range of internal and external, horizontal and vertical applications, making it almost the perfect “Universal” joint sealant. 

Approx. Rs 160 / LitreGet Latest Price

Product BrochureProduct Details:

Release agent for easy de-stripping of concrete formwork.
MasterFinish RL 204 has been specially formulated to provide an easy andcomplete release of the concrete from forms and asignificantly improved quality of the concrete surfacewhich is free from cavities and pores.

Approx. Rs 1,400 / BagGet Latest Price

Product BrochureProduct Details:

Description:

• Deformable multipurpose grey/White coloured tile adhesive for all ceramic coverings, porcelain, nonmoisture sensitive natural stones and substrates Master Tile FLX 424 is a grey colored, polymer enriched, cementitious flexible tile adhesive with extended open time and reduced slip for thin bed fixing of fully vitrified ceramic tiles and porcelain mosaic tiles in interior or exterior situations, especially those exposed to permanently wet conditions or substrates subject to deformations.

Recommended Uses

• MasterTile FLX 424 is the adhesive of choice for demanding substrates and demanding situations.

Typical application Areas include:

• Suitable for Ceramic tiles conforming to IS13712(2006) type Ia, Ib, IIa ,IIb tiles
• Wet areas including kitchen, bathrooms & Showers in domestic, institutional, commercial and industrial location
• Tile on tile application.
• For internal &external applications
• For Floors, Walls, Podium decks, roofs including large format tiles.
• For laying non-moisture sensitive natural stone
• For Laying Ceramic, Porcelain, Glass Mosaic, Fully vitrified tiles and brick tiles.
• For Swimming pools, pool surrounds, wet rooms and cold storage depots
• For substrates such as cement screeds, precast concrete elements, aerated concrete, heated screeds, plaster and existing floors and walls
• For fixing tiles on bonded waterproofing membranes such as MasterSeal 561.
• On cementitious screeds, ground anhydrite and/or gypsum based floated screeds, precast concrete elements, aerated concrete, heated screeds, plaster boards, gypsum fibre boards, dry screeds, plaster, masonry, old ceramic tiles.

Approx. Rs 800 / KgGet Latest Price

Product BrochureProduct Details:

MB-UGC MP 355 HF is a sophisticated, two component, solvent-free polyurethane injection resin specifically engineered for the cessation of rapid water flow and ground stabilization. This product comprises two distinct components, Part A and Part B, which, upon mixing, react to form a robust, hydrophobic polyurethane foam.

MB-UGC MP 355 HF is best use for water stopping in Rocks, Soil and Concrete where high foam factor is also required

Product Price :Get Latest Price

Product BrochureProduct Details:

MasterPolyheed 8104 is a new generation admixture based on modified poly-carboxylic ether. The product has been primarily developed for applications in Ready-mix & Site-batched concrete where the highest performance is required.

Approx. Rs 900 / LitreGet Latest Price

Product Details:

MasterSeal P 640 is a single component, polyurethane based, solvent containing primer for absorbent surfaces in applications where MasterSeal M 640 is utilized.