Fosroc Construction Chemicals

Approx. Rs 80 / BagGet Latest Price

Uses:

• Cebex 100 is an admixture for cementitious grouts where a reduced water/cement ratio and positive expansions are required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing.

Approx. Rs 700 / PieceGet Latest Price

Approx. Rs 175 / LitreGet Latest Price

Approx. Rs 420 / BagGet Latest Price

Description:
Free flow, high strength, non-shrink, cementitious precision grout
Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimizing water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.
Uses
Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.
Advantages

Gaseous expansion system compensates for shrinkage and settlement in the plastic state

No metallic iron content to cause staining

Pre-packed material overcomes onsite batching variations

Develops high early strength without the use of chlorides

High ultimate strength ensure the durability of the hardened grout

Free flow ensures high level of contact with load bearing area

Approx. Rs 960 / LitreGet Latest Price

Epoxy resin concrete bonding agent. Nitobond EP is based on solvent free epoxy resins containing pigments and fine fillers. It is supplied as a two part material in pre-weighed quantities for ready onsite mixing and use. Coloured components – white base and green hardener – provide visual evidence that adequate mixing is achieved.

Uses:

• For bonding fresh wet cementitious materials to existing cementitious surfaces. For use on horizontal surfaces or on vertical surfaces where mortar or concrete can be supported by formwork. The long ‘open’ life makes it suitable for use with formwork or where additional steel reinforcement has to be fitted. The product is ideal for roads, bridges, pavements, loading bays and factories, building segment and for bonded or granolithic floor toppings. Nitobond EP is equally suited to internal and external applications.
• Nitobond EP may also be used as part of a repair system where a bonding agent is required or where the substrate is likely to remain permanently damp or wet.

Advantages:
Nitobond EP can be applied by brush.

• More overlay time : Enables to place the concrete for longer period of time, without risk of delamination.
• High bond strength : Bond strength is more than the tensile strength of good quality concrete
• Barrier coat : Acts as a ‘barrier coat’ to the migration of chloride ions from host concrete.
• Can be applied on to dry or damp substrates

Approx. Rs 300 / LitreGet Latest Price

• Reebaklens RR is used as a rust remover from steel bars prior to encasing in concrete / microconcrete. It can also be used on other steel surfaces prior to coating with epoxy systems.

• Rapid action Safe with metals (except zinc and galvanised steel), wood, glass, plastic and rubber. No corrosive action. Penetrates oil and grease.

Approx. Rs 490 / KgGet Latest Price

Product Price :Get Latest Price

Approx. Rs 380 / BagGet Latest Price

Approx. Rs 1,680 / KgGet Latest Price

Approx. Rs 86 / KgGet Latest Price

Approx. Rs 130 / KgGet Latest Price

Approx. Rs 186 / ltreGet Latest Price

Approx. Rs 80 / KgGet Latest Price

Product Price :Get Latest Price

Approx. Rs 750 / NumberGet Latest Price

Approx. Rs 220 / LitreGet Latest Price

Additional Information:

Approx. Rs 1,100 / KgGet Latest Price

High strength, low viscosity epoxy resin grout Conbextra EP 10 is a solvent free epoxy resin grout designed for grouting of gap widths of 0.25 to 10 mm. It is an all liquid system consisting of base and hardener. The components are supplied in the correct mix proportions designed for whole pack mixing on site.

Uses

Provides a free flowing grout, for use where physical properties and chemical resistance of the hardened grout are of utmost importance. It is suitable for a wide range of heavy duty applications including:

• Underplate grouting to structural elements.
• Base plate grouting in dynamic load situations such as turbines and other reciprocating machinery.
• Heavy industrial applications in steelworks, refineries chemical plants and electroplating works.
• Structural infill where very high strength is required.
• Rail track applications, to support heavy cranes, or on transporter rails.

Advantages:

• Excellent durability – high compressive, flexural and tensile strengths ensure a long working life.
• Cost effective – high early strength gain promotes minimum downtime and early commissioning of plant.
• User friendly – simple, full pack mixing to ensure that the performance characteristics are achieved.
• Versatile – suitable for a wide range of loading situations including repetitive dynamic loads.
• Excellent in service performance – non-shrink capability ensures full surface to surface contact.

Approx. Rs 85 / LitreGet Latest Price

• To minimise permeability and increase the waterproofing properties of concrete and cement sand mortars for critical applications like roof slabs and screeds, basements, external plastering, bathroom floors, water tanks, sumps, drains etc

• Liquid admixture: Instant and complete dispersion throughout the mix. Uniform waterproofing throughout concrete matrix.
• High efficiency: Dramatic reduction in permeability of concrete/ mortar
• Improved workability: Improves compaction of concrete and mortar, even where harsh sands or aggregates are used.
• Improved concrete quality : Minimises porosity and honey combing. Produces dense homogenous concrete.

Approx. Rs 90 / KgGet Latest Price

Approx. Rs 120 / KgGet Latest Price

Product Price :Get Latest Price

Approx. Rs 580 / LitreGet Latest Price

Nitozinc Primer is supplied as a two component system based on metallic zinc and epoxy resin which on mixing gives a grey coloured liquid.

Recommended Uses:

• Nitozinc Primer is recommended for priming exposed steel reinforcement for use with Fosroc concrete repair mortars. The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations. Nitozinc Primer is compatible with all Renderoc mortars and fluid micro concretes.

Advantages:

• Anti corrosive – Active ‘Zinc-rich’ system combats corrosion by electro chemical means.
• Two component product – easy to mix and use.
• Timesaving – Touch dry after 30 to 45 mins.
• Excellent adhesion – Exhibits excellent bond strength in cementitious repairs.

Approx. Rs 165 / LitreGet Latest Price

Chemical mould - Release Agent

Reebol is specially formulated blend of mineral oils and chemicals having release properties which are superior to those of a conventional mould oil. The chemicals react with the alkali in the concrete to form a thin water repellent skin on the surface of the mould, thereby enabling easy striping from concrete and acting as a protection to steel and wooden formwork. Reebol is supplied as a pale straw coloured liquid ready for direct application and use.

Uses

To provide quick, clean and easy stripping of moulds, and formwork and ensure high quality fair-faced and stain-free concrete.

Advantages

•  Ensures easy release, good fair-faced concrete
•  Can be used on all types of formwork
•  Minimizes surface blemishes and staining
•  Minimizes cleaning of shutters before re-use
•  Reduces opportunity of damage to formwork, extending usable life.

 Coverage

A coverage between 20 to 60m2 per liter is possible depending upon the porosity and texture of mould surface.

Approx. Rs 130 / LitreGet Latest Price

Approx. Rs 350 / BagGet Latest Price

• Renderoc RG is used for repairs to damaged reinforced concrete elements, particularly where access is restricted and where vibration of the placed material is diffi cult or impossible.
• It is suitable for various structural strengthening measures such as encasement build-ups, jacketing, piletop encapsulation resin system, etc.

• Gaseous expansion system compensates for shrinkage and settlement in the plastic state.
• Can be pumped or poured into restricted locations.
• Highly fl uid to allow for placement without vibration.
• Pre-packed to overcome site-batched variations.
• Rapid strength gain to facilitate early reinstatement.
• High ultimate strengths and low permeability of cured repair.
• Contains no chloride admixture. 
• Ensures piletop integrity as part of a waterproofi ng system

Approx. Rs 170 / LitreGet Latest Price

• Ensures easy release, reducing damage and improving efficiency of production. 
• Minimises surface blemishes and staining, promoting high quality fair-faced concrete even with white cement. 
• Reduces opportunity of damage to formwork, extending usable life. ?? Minimises cleaning of formwork before re-use.
• Suitable for use with virtually all types of formwork.
• Inhibits corrosion of steel formwork.

Product Price :Get Latest Price

Approx. Rs 95 / KgGet Latest Price

High performance elastomeric cementitious waterproof coating Brushbond RFX is a two component acrylic polymer modified cementitious coating which consists of Brushbond RFX powder and Brushbond RFX liquid acrylic emulsion. It requires only the addition of clean water at site to produce an easily brushable coating. Brushbond RFX can simply be applied by stiff brush, roller or trowel to obtain the desired thickness.

Uses:

• Brushbond RFX is a high performance elastomeric cementitious coating used for waterproofing and to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen & water.
• Brushbond RFX is suitable for all types of structures including those in coastal environments.
• The product can be used on concrete, brick and blockwork substrates and is equally suitable for new and existing structures. The product is designed to reface and even out variations in concrete and masonry surfaces and bridge shrinkage cracks. It provides a seamless, flexible waterproof coating suitable for water tanks, reservoirs, drainage culverts basements, roofs, toilets & wet areas. The product provides a tough durable water resistant coating which can withstand light pedestrian traffic and also has excellent weather resistance for exterior applications.

Advantages:

• Excellent barrier to carbon dioxide, chloride and sulphateions.
• Allows water vapour to escape from the structure.
• Waterproof-suitable for water retaining structures.
• High resistance to the effect of long-term weathering, durable in all climate conditions including UV attack.
• Non toxic – ideal for potable water tanks.
• Flexible, with thermal expansion similar to concrete.
• Excellent bond to concrete and masonry.
• Good crack accommodation capacity.
• Minimum surface preparation needed and low labour costs.

Coverage:

• This depends on the required consistency. The approximate coverage per pack at even consistency (1mm thickness) is as follows

• Coverage (15kg + 5.088kg pack) 12 – 14m2
• Coverage (5kg + 1.71kg pack) 4 – 4.5m2

Approx. Rs 200 / sq ftGet Latest Price

Approx. Rs 420 / PieceGet Latest Price

Approx. Rs 540 / PieceGet Latest Price

Approx. Rs 900 / LitreGet Latest Price

Approx. Rs 860 / KgGet Latest Price

• Bonding old and new cementitious substrates.

• Can be applied on concrete & mortar substrate 
• Facilitates improvement in mechanical strength 
• Good positive adhesion

• The entire contents of the hardener Can should be poured into the resin container and the two materials thoroughly mixed until a uniform colour is obtained. To facilitate application at temperatures below 100 C the separate components should be warmed in hot water to a maximum of 250 C before mixing. 

Approx. Rs 550 / PieceGet Latest Price

Approx. Rs 310 / KgGet Latest Price

Approx. Rs 430 / KgGet Latest Price

Approx. Rs 125 / LitreGet Latest Price

Approx. Rs 155 / LiterGet Latest Price

Approx. Rs 150 / KgGet Latest Price