BASF Construction Chemicals

Approx. Rs 890 / KgGet Latest Price

Product BrochureProduct Details:

Description:

• Low viscocity epoxy resin with long potlife for crack injection

 
Recommended Uses:

• Stabilised cracks in structural members
• Sealing of cracks from 0.1mm to 10mm
• Unfilled voids behind tiles or stone facades
• Bonding of steel plates to concrete
• Rapid structural repair of concrete
• Grouting dowels

Estimating Data:

• Usage will depend on the injection pressure and the size of the cracks and is impossible to estimate.

Approx. Rs 100 / KgGet Latest Price

Product BrochureProduct Details:

Description:

• Acrylic based Polymer Modified Cementitious Composite coating system

Typical Applications:

• To reface and even out variations in concrete surfaces.
• As a waterproof lining for water retaining structures.
• For coating seawater channels.
• Sealing and coating tie bar holes to ensure water tightness.
• For waterproofing and protection against brackish water.
• To provide foundation protection.
• As a waterproof coating for roofs.
• As a backing to marble and granite to prevent water ingress and thus alleviate surface staining.
• To provide protection to concrete surfaces from carbonation and chloride attack.
• For use on pedestrian walkways in marine areas.

Approx. Rs 75 / KgGet Latest Price

Product BrochureProduct Details:

Cementitious high strength non-shrink Iron Reinforced precision grout MasterFlow 880 is a non-shrink, iron reinforced precision grout with high early and ultimate strengths. It is formulated to provide extended working time even at high ambient temperatures when mixed and placed at any recommended consistency. MasterFlow 880 is normally placed at a flowable consistency to completely fill voids between 10mm and 100mm.  

Approx. Rs 135 / KgGet Latest Price

Product BrochureProduct Details:

Premixed industrial floor topping based on hydraulic binder and specially treated metallic aggregates.

Recommended Uses:

Key areas subject to heavy abrasive traffic, impact and continuous wear, such as loading docks, aisles, waste transfer facilities, truck or tractor repair areas, and mill scale sluiceways.

Areas where safety authorities have deemed other floor surfaces hazardous because of excessive wear dangerously buckled steel plates, etc.

Bunkers and tunnels (used for iron, ore and coal).

Areas subjected to attrition by tracked vehicles.

Floors with scraper blades in constant contact.

Approx. Rs 18 / KgGet Latest Price

Product Details:

Description:

• Non-shrink, cementitious grout for use in general civil engineering works MasterFlow 718 is a ready to use, non-shrink, natural aggregate cementitious grout for use in general civil engineering works. MasterFlow 718 provides extended working life and high early and ultimate strengths.

Recommended Uses:

MasterFlow 718 is recommended for:

• stanchion baseplates and columns;
• prefabricated concrete panels and beams;
• bridge bearing plates;
• anchor bolts and bars;
• underpinning;
• patch repair works.

Estimating Data:

• A 25 kg bag of MasterFlow 718 when mixed to a flowable consistency (Add 4.0 litres water) will yield 13.2 litres grout.

Approx. Rs 110 / KgGet Latest Price

Product Details:

MasterPel 760 is a crystalline powder admixture for concrete to achieve high resistance to water ingress. It is based on a blend of Portland cement, processed silica sand and special catalytic agents which converts hydration by-products to solid crystalline formation in the water transporting capillary tracts and hydration pores.

Approx. Rs 19 / KgGet Latest Price

Product BrochureProduct Details:

MasterEmaco S 346 micro concrete pourable mortar is a dual shrinkage compensated, high flow, high strength formulation for structural concrete repairs. MasterEmaco S 346 is suitable for placing in thicknesses of 25mm to 200 mm. MasterEmaco S 346 provides a durable, strong structural repair fully compatible with host concrete.

Approx. Rs 310 / KgGet Latest Price

Product BrochureProduct Details:

Flexible and elastic single component polyurethane waterproofing membrane
MasterSeal M 262 AP is a one component, high solids, pure polyurethane waterproofing which cures with the humidity in the atmosphere. It produces a highly elastic, hydrophobic membrane and has been designed to offer excellent long term waterproofing performance  

Approx. Rs 1,200 / KgGet Latest Price

Product Details:

Description:

• Plasticised expanding admixture for cement slurry and grout

Recommended Uses:

• Cable duct grouting
• Cavity filling
• Filling gaps between precast elements
• Repairing honeycombs by pressure grouting
• Site batched repair/reprofiling mortars
• Filling up the plumbing & electric chases

Estimating Data:

• MasterFlow 150 is used at the rate of 500gm per 100kg cement.

Approx. Rs 750 / KgGet Latest Price

Product Details:

Description:

• Solvent free long potlife epoxy bonding agent

Recommended Uses

• Structural bonding of new to old concrete
• Steel bonding
• Grouting dowels.

Approx. Rs 230 / sq ftGet Latest Price

Product BrochureProduct Details:

Wall-nut 5 is a high performance, 100% acrylic exterior coating , a coating formulated withspecial dust proof, anti-fungal and powerful weather-proof features. It is available in animaginative variety of attractive shades and features which ensure that every coat of Wall-Nut 5forms a durable and protective exterior coating while adding to the aesthetic appeal of everystructure. It is easy to handle and apply plus has the value for money. This makes Wall-Nut 5 thefirst choice for imaginative, yet durable exterior coatings.

Features / Advantages:

• Superb resistance to dirt pick-up for an attractive appearance
• Resistance to chalking and flaking
• Waterborne chemistry for uncomplicated handling and clean upHighly durable & ultraviolet resistant
• Excellent anti-fungal and anti-algal properties
• Weatherproof
• Available in attractive shades

Typical Application:

• Exterior R.C.C. surface
• Masonry walls / facades
• Asbestos sheets

Technical Information:

• Nature: One component water thinnable
• Thinner: Municipal or potable water (1 Lit Wall-Nut 5 + 400 ml water)
• Drying Time: Dry to touch - 30 minutes
• Recoating Period: Minimum 6 hours at room temperature (Ideally 24 hours)
• Dry film thickness: 25-30 microns per coat
• Finish: Smooth and mattShades: As per shade cardMethod of Application: By brush, roller and airless spray
• Recommended coats: 2-3 depending on the substrate and DFT
• Adhesion on concrete: Good
• Coverage (per ltr/2 coat)Bare Concrete: 50 sq.ft
• Asbestos Panel: 80 sq.ft
• Sealer Coat: 67 sq.ft
• White Cement Slurry: 61 sq.ft(1:1 dilution with water).

Approx. Rs 400 / KgGet Latest Price

Product BrochureProduct Details:

Water-Based Polyurethane Hybrid Acrylic Coating for SRI Coating & Waterproofing membrane.
MasterSeal 379 is one component, water-based, liquid applied, polyurethane hybrid acrylic coating for waterproofing and Solar Reflective Coating (SRI). The product can be easily applied and forms an elastic, seamless membrane that protect old and new structures efficiently. It can be applied by brush or airless spray machine in two or more coats.

Approx. Rs 460 / KgGet Latest Price

Product Details:

Description:

• High strength epoxy bedding and repair mortar

Recommended Uses:

• Bedding of bridge beams or steel bridge bearings
• Repairing surface defects in concrete in horizontal, vertical and overhead applications
• Fining of injection ports for MasterInject resins
• Bonding of dowels, bolts and anchors into concrete
• Rapid structural repair of concrete
• Repair of concrete posts in situ

Approx. Rs 80 / LitreGet Latest Price

Product BrochureProduct Details:

Recommended Uses:

• MasterPel 777 can be used in all types of concrete and mortar that is used in all types of residential, commercial and infrastructural construction. Additionally, it can be used in concrete applications constantly or intermittently in contact with water such as sea walls, tunnels, basements, structural and pre-cast concrete in exposed superstructures.
• MasterPel 777 is used as a dual action admixture combining both the waterproofing cum plasticizingeffect for cement concrete, mortars and plasters.

Dosage:

• As a guide, a dosage range of 100 ml to 200 ml per 50kg bag of cementitious material is recommended.
• Optimum dosage of MasterPel 777 should be determined with trial mixes. Higher dosages may be required when certain combinations of materials and conditions are present or water reduction in excess of 15% is required. Because of variations in concrete materials, job site conditions, and/or applications, dosages outside of the recommended range may be required. In such cases, contact your local BASF representative.

Approx. Rs 325 / KgGet Latest Price

Product BrochureProduct Details:

MasterBrace 1441 is an epoxy bonding system consisting of two parts that are distinctly coloured to facilitate proper mixing - a white coloured Part ‘A’ and a black coloured Part ‘B’, RECOMMENDED USES MasterBrace 1441 is recommended for bonding two rigid elements exposed to sustained loads especially at the bond line, such as: Bonding precast segments in bridges & viaducts. Bonding external steel reinforcing plates for strengthening beams, columns and slabs. Bonding external Carbon laminates for strengthening beams, columns and slabs. Anchoring bolts, dowels, steel bars in concrete. Bonding the ends of concrete or metal pipes used to transport water or sewage.

Approx. Rs 320 / KgGet Latest Price

Product Details:

Description:

• 2-part thixotropic epoxy adhesive Sikadur®-31(IN) is a solvent-free, moisture tolerant, thixotropic, two part structural adhesive and repair mortar, based on epoxy resins and special fillers, designed for use at temperatures between +10°C and +40°C.

Uses As a structural adhesive for:

• Concrete elements
• Hard natural stone
• Ceramics, fibre cement
• Mortar, Bricks, Blocks, Masonry etc.
• Steel, Iron, Aluminium
• Wood
• Polyester, Epoxy
• Glass

As a fast setting repair mortar for:

• Corners and edges
• Hole and void filling
• Joint arises
• Joint filling and crack sealing:
• Rigid joint filling
• Crack filling and sealing (non-moving)

Approx. Rs 34 / KgGet Latest Price

Product Details:

Description:

• MasterEmaco S 488 trowelable mortar is a dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs.
• MasterEmaco S 488 is suitable for placing in thicknesses of 12mm to 50 mm both vertically and overhead.
• MasterEmaco S 488 provides a durable, strong structural repair fully compatible with host concrete.

Recommended Uses:

• MasterEmaco S 488 is the ideal material for vertical or horizontal structural repairs where the thickness of repair is more than 12mm and use of hand or machine applied structural repair systems is required. Typical applications are:
• Extensive repairs to beams, columns and other structural elements.
• Repair of structural members subjected to repetitive loading.
• Repairs to piers, navigation locks, dams seawalls and other marine structures
• Repairs to bridges, tunnels, garages, silos etc.

Estimating Data:

• Each bag of MasterEmaco S 488 when mixed with 3.5L of water yields 12.4L

Approx. Rs 26 / KgGet Latest Price

Product Details:

Description:

• MasterEmaco S 348 trowelable mortar is a dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs.
• MasterEmaco S 348 is suitable for placing in thicknesses of 12mm to 50 mm both vertically and overhead. MasterEmaco S 348 provides a durable, strong structural repair fully compatible with host concrete.

Recommended Uses

• MasterEmaco S 348 is the ideal material for vertical or horizontal structural repairs where the thickness of repair is more than 10-12 mm and use of hand or machine applied structural repair systems is required. Typical applications are:
• Extensive repairs to beams, columns and other structural elements
• Repair of structural members subjected to repetitive loading over wet hessian.

Estimating Data:

• Each bag of MasterEmaco S 348 when mixed with 4.0L of water yields 12.8L.

Approx. Rs 195 / LitreGet Latest Price

Product BrochureProduct Details:

MasterEmaco P 130 is a two component, solvent borne zinc rich epoxy primer, providing active galvanic protection to steel. It is a thick grey liquid of paint-like consistency, recommended for use where chloride induced attack on steel is likely.

Recommended Uses:

• As a protective coating to steel reinforcing bars in concrete.
• As a touch-up primer for damaged galvanised metal.
• As a primer for steel substrates prior to suitable top coating.

Approx. Rs 425 / KgGet Latest Price

Product BrochureProduct Details:

Description:

• Liquid cold-applied waterproofing membrane system

Recommended Uses:

• Waterproofing exterior, below grade concrete and between concrete slab applications.

Estimating Data:

• Wet Film Thickness @ 1.65mm = 0.6m2/liter Coverage per 18.93 liters is approximately 11.6m².

Approx. Rs 400 / KgGet Latest Price

Product BrochureProduct Details:

we Bils Innovations India Private Limited.” We are Wholesale Trader of BASF Construction Chemicals, Sika Construction Chemicals, Choksey Construction Chemicals, Chryso Construction Chemicals, Cico Construction Chemicals etc. The products are highly acknowledged. They are known to make use of the best quality components, coupled with the latest technology. 

Approx. Rs 98 / KgGet Latest Price

Product Details:

Description:

• Cement Based Capillary Crystalline Waterproofing Material

Recommended Uses:
MasterSeal 501 and MasterSeal 502 are used for:

• water tanks, reservoirs;
• building basements and foundations;
• swimming pools and water parks;
• sewage and water treatment plants;
• dams, canals, tunnels, harbours;
• retaining walls and sea defence walls;
• concrete pipes.

Approx. Rs 20 / KgGet Latest Price

Product Details:

Description:

• Ready to use, Non-Shrink, cementitious, micro-concrete for concrete repairs MasterEmaco S 340 micro concrete pourable mortar is a high flow, high strength formulation for structural concrete repairs and for general purpose repairs MasterEmaco S 340 is suitable for placing in thicknesses of 25mm to 200 mm. MasterEmaco S 340 provides a durable, strong structural repair fully compatible with host concrete.

Recommended Uses:

• MasterEmaco S 340 is the ideal material for vertical or horizontal structural repairs where the thickness of repair is more than 25mm and use of pourable mortar is preferable to hand or machine applied repair systems. Typical applications are:
• Extensive repairs to beams, columns and other structural elements
• Repair of structural members subjected to repetitive loading
• Jacketing of beams, columns and other structural elements for strengthening

Curing:

• MasterEmaco S 340 should be cured after formwork removal by MasterKure 181

Estimating Data:

• Each bag of MasterEmaco S 340 when mixed with 3.5L of water yields 12.5L.

Approx. Rs 690 / KgGet Latest Price

Product BrochureProduct Details:

MasterProtect 1812 is a two components, solvent free, pitch extended epoxy resin system to provide a high build coating that protects concrete and metal substrates from a wide range of aggressive chemicals

Approx. Rs 450 / KgGet Latest Price

Product BrochureProduct Details:

MasterRheobuild 1126NDis composed of synthetic polymers specially designed to allow considerable reduction of mixing water while maintaining control on extend of set retardation. MasterRheobuild 1126NDis preferred admixture for triple blend binder system based high performance concrete (HPC) mixes or mixes containing micro silica or metakaolin. MasterRheobuild 1126NDis chloride free.

Recommended Uses:

• Concrete containing Silica fume/ Metakaolin
• Ready mixed concrete
• Congested/complex reinforced sections
• Pre-cast concrete production
• Long-distance transporting
• Pumped concrete
• Low water/binder ratio mixes
• Mixes requiring >20% water reductions

Approx. Rs 135 / LitreGet Latest Price

Product Details:

Description:

• Vegetable Oil based, ready-to-use, form-release agent Chemical release agent suitable for mould and shutter faces prior to casting concrete in order to achieve a clean release. After removal of the formwork, the resultant concrete has a smooth hard uniform finish, with reduced incidence of blow holes. MasterFinish 202IN can be applied to the formwork by spray in the form of a light uniform mist coating.

Recommended Uses:

• Prestressed, precast, and pipe plants
• RCC structures
• MasterFinish 202 is well suited for shutter faces made from wood, steel, fibreglass, aluminium & paper.
• MasterFinish 202 reacts chemically with cement to impart excellent release properties to treated surfaces. Concrete cast against surfaces coated with MasterFinish 202 exhibit a smooth, hard, uniform finish.
• MasterFinish 202 has no negative effect on the properties of concrete nor will it impair the adhesion of subsequent surface treatments when applied at the recommended coverage rates.

Dosage:

• The coverage rate for MasterFinish 202 is 30 to 70m²/litre when spray applied depending on smoothness and porosity of the formwork used.

Approx. Rs 25 / KgGet Latest Price

Product Details:

Master Emaco S 466 micro concrete pourablemortar is a dual shrinkage compensated, high flow,high strength formulation for structural concreterepairs. Master Emaco S 466 is suitable for placing inthicknesses of 25mm to 200 mm.Master Emaco S 466 provides a durable, strongstructural repair fully compatible with hostconcrete.

Recommended Uses:

• MasterEmaco S 466 is the ideal material forvertical or horizontal structural repairs where thethickness of repair is more than 25mm and use of pourable mortar is preferable to hand or machineapplied repair systems. Typical applications are:
• Extensive repairs to beams, columns and otherstructural elements
• Repairs to piers, navigation locks, damsseawalls and other marine structures
• Repair of structural members subjected torepetitive loading
• Repairs to bridges, tunnels, garages, silos etc
• Jacketing of beams, columns and otherstructural elements for strengthening

Features And Benefits:

• Dual shrinkage compensated - Volume stablein wet and hardened state reducing crackingtendency
• One component, factory made only additionof water - Uniform predictable performanceeven in remote situations
• No bonding agent required - Simpleinstallation
• Impermeable to aggressive element: long liferepairs
• Pourable mortar - Able to repair complexprofiles easily
• Fast and easy placing - Reduced time forrepairs

Properties:

• Appearance Grey powder Water powder ratio 0.14 Compressive strength(ASTM C109 7cm cube) 25 MPa 1 Day35 MPa 3 Days 45 MPa 7 Days65 MPa 28 Days3 Density Approx. 2300kg/m Mixing water per 25kg bag Approx. 3.25 – 3.75 litres Temperature for application (substrate and material) Between +5 and +40°C(+5 and +30°C)Flexural Strength(ASTM C78) 7.5MPa @ 28 days Tensile Strength(ASTM C496) 3.5MPa @ 28 days Resistivity appox. 12500Ω cm Water penetration < 5mm Coefficient of Oxygendiffusion 2.58 x 10-8
• Application Surface preparation All loose traces of concrete or mortar, dust, grease oil, etc. must be removed. Damaged orcontaminated concrete shall be removed to obtaina keyed aggregate exposed surface. Non-impact/vibrating cleaning methods, e.g. grit or highpressure water blasting are recommended.
• Cut theedges of the repair vertically to a minimum depthof 20 mm. Clean all exposed reinforcement to aminimum grade of Sa 2 according to ISO 8501-1/ ISO 2944-4. Ensure back of reinforcing bar isalso clean Where reinforcing bars are corroded, cut back theconcrete to at least 20mm behind the reinforcingbars Water powder ratio and coat the old and newreinforcement with Master Emaco P 130 for superior protection from corrosion.Grit blast around the reinforcing bars to removecorrosion products.
• Replace the affected part ofreinforcing bar if the diameter after grit blasting isfound reduced by more than 20% of the originaldiameter on the advice of the structural engineerresponsible for the works.

Approx. Rs 400 / PieceGet Latest Price

Product Details:

Description:

• One part polyurethane based elastomeric joint sealant

Recomanded Uses:

• MasterSeal NP 472 has been developed specifically for sealing dynamically moving joints such as; expansion and control joints.
• MasterSeal NP 472 demonstrates high elasticity and recovery properties and therefore may be used to bond and seal most common building materials including concrete, glass, wood, stone, metal and anodised aluminium. In addition
• MasterSeal NP 472 has excellent tear resistance and good weathering characteristics.

Consumption:

Applicable joint length with a 600ml cartridge (in meters)

Approx. Rs 320 / PieceGet Latest Price

Product BrochureProduct Details:

Master Weld 909 is a high performance, construction adhesive, based on the latest hybrid technology. It provides exceptional initial grab and a long term, strong, durable bond. It cures through the reaction with atmospheric moisture to a resilient elastic rubber capable of withstanding significant loads. It is able to provide permanent bonding, even to heavy building materials, on most substrates, without temporary bracing or support, thus saving significant time and money on the job site. It is free of isocyanates, phthalates, solvents and silicones and is thus almost odorless on cure.

Advantages:

• Extreme high initial grab: can support heavy weights without temporary bracing or support
• High ultimate strength and mechanical resistance: permanent, risk-free bonding
• Excellent resistance to UV, weather and water: can be used internally or externally
• Bonds perfectly on most substrates without primer: universally used
• Damp tolerant: less risk for external use
• Meets EMI Code EC1 Plus: zero emissions.

Approx. Rs 450 / MeterGet Latest Price

Product BrochureProduct Details:

MasterSeal 910 Waterbar is suitable for all construction joints subject to hydrostatic pressure, on one or both sides. MasterSeal 910 provide simple but efficient waterproofing of construction joints. Movements in the joint, e.g. by shrinkage or settlement in the substrate, are taken up by the elastic profile of the MasterSeal 910 Waterbar. MasterSeal 910 has been successfully employed to waterproof joints where an opening of up to 5mm was deliberately created. Water pressure of up to 5 bar was sealed. MasterSeal 910 is a component of the BASF pilecap waterproofing and watertight jointing systems. Consult your representative for details.  

Approx. Rs 1,800 / KgGet Latest Price

Product BrochureProduct Details:

Description:

• Vinyl Ester Methacrylate resin for crack injection via injection hoses and packers.

Typical Uses

• Injection into MasterSeal 909 hose system or directly into concrete and rock. Due to its low viscosity microcracks and capillaries can easily be filled by injection.
• In contact with water it increases its volume. This enables sealing to take place even when the crack moves. No other materials have the same characteristics.
• The expansion is dependent on the amount of water available.
• Works in a saline environment.

Approx. Rs 450 / PieceGet Latest Price

Product BrochureProduct Details:

Master Seal joint sealing system consists of two products Master Seal 930 and Master Brace ADH 2200 epoxy. The Master Seal 930 is a highly elastic, rot-proof and chemically resistant sealing membrane. Master Brace ADH 2200 is a two part epoxy compound which establishes a strong bond to
various types of substrate.

Approx. Rs 420 / MeterGet Latest Price

Product BrochureProduct Details:

MasterSeal 910 AP Waterbar is suitable for all construction joints subject to hydrostatic pressure, on one or both sides. MasterSeal 910 AP provide simple but efficient waterproofing of construction joints

Approx. Rs 340 / KgGet Latest Price

Product BrochureProduct Details:

Description:

• MasterWeld 303 is a high grade acrylic adhesive and filler with excellent initial grab and a long term, strong, durable bond. It cures through the evaporation of water and is odorless during cure. It can be painted, after full cure, with most water based and synthetic paints 

Recommended Uses 

• MasterWeld 303 has been developed
• specifically for interior bonding of wooden
• thresholds, door frames, profiles, panels,
• ornaments, decorative trims.
• For bonding chipboards and uPVC on
• brickwork, stone or concrete.
• Also suitable for EPS and XPS polystyrene foam.
• Can be used as a crack filler prior to painting.